Telephony
• Two voice ports (RJ-11) for analog phones or Fax machines
• Impedance Agnostics - 8 Configurable Settings
• Call Waiting, Cancel Call Waiting, Call Waiting Caller ID
• Caller ID with Name/Number (Multi-national Variants)
• Caller ID Blocking
• Call Forwarding: No answer, Busy, All
• Do Not Disturb
• Call Transfer
• Three-way Conference Calling with Local Mixing
• Message Waiting Indication - Visual and Tone Based
• Call Return
• Call Back on Busy
• Call Blocking with Toll Restriction
• Delayed Disconnect
• Distinctive Ringing - Calling and Called Number
• Off-hook Warning Tone
• Selective/Anonymous Call Rejection
• Hot line and Warm Line Calling
• Speed Dialing of 8 Numbers/Addresses
• Music on Hold

package conternts
• PAP2T Phone Adapter Unit
• Power Adapter
• RJ-45 Ethernet Cable
• Quick Installation Guide

* Note: Many specifications are programmable within a defined range or list of options.
Please see the PAP2T Administration Guide for details. The configuration profile is
uploaded to the PAP2T at the time of provisioning.

data networking:

•  MAC Address (IEEE 802.3)
• IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883)
• ARP - Address Resolution Protocol

• DNS - A Record (RFC 1706), SRV Record (RFC 2782)
• DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
• ICMP - Internet Control Message Protocol (RFC792)
• TCP - Transmission Control Protocol (RFC793)
• UDP - User Datagram Protocol (RFC768)
• RTP - Real Time Protocol (RFC 1889) (RFC 1890)
• RTCP - Real Time Control Protocol (RFC 1889)
• DiffServ (RFC 2475), Type of Service - TOS (RFC 791/1349)
• SNTP - Simple Network Time Protocol (RFC 2030)

voice gateway :

SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264)
SIP Proxy Redundancy - Dynamic via DNS SRV, A Records
Re-registration with Primary SIP Proxy Server
SIP Support in Network Address Translation Networks - NAT (incl. STUN)
Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP
Codec Name Assignment

Voice Algorithms : G.711 (A-law and μ-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Dynamic Payload
Adjustable Audio Frames per Packet

Fax Capability : Fax Tone Detection Pass-Through
Fax Pass-Though - Using G.711
DTMF: In-band & Out-of-band (RFC 2833) (SIP Info)
Flexible Dial Plan Support with Interdigit Timers and IP Dialing
Call Progress Tone Generation
Jitter Buffer - Adaptive
Frame Loss Concealment
Full Duplex Audio
Echo Cancellation (G.165/G.168)
VAD - Voice Activity Detection with Silence Suppression
Polarity Control
Hook Flash Event Signaling
Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
Music on Hold Client
Streaming Audio Server - up to 10 sessions

Securty:
Password Protected System Reset to Factory Default
Password Protected Admin and User Access Authority
Provisioning/Configuration/Authentication:
HTTPS with Factory Installed Client Certificate
HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
Up to 256-bit AES Encryption
Web Browser Administration & Configuration via Integral Web Server

provisioning, administration & maintenance

Telephone Key Pad Configuration with Interactive Voice Prompts
Automated Provisioning & Upgrade via HTTPS, HTTP, TFTP
Asynchronous Notification of Upgrade Availability via NOTIFY
Non-intrusive, In-Service Upgrades
Report Generation & Event Logging
Stats in BYE Message
Syslog & Debug Server Records - Per Line Configurable

physical interface
1 10/100baseT RJ-45 Ethernet Port (IEEE 802.3)
2 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring)

SLIC
Ring Voltage: 40-55 VRMS Configurable *
Ring Frequency: 10 Hz - 40 Hz *
Ring Waveform: Trapezoidal and Sinusoidal *
Maximum Ringer Load: 3 REN
On-hook/off-hook Characteristics:
On-hook voltage (tip/ring): -50 V NOMINAL
Off-hook current: 25 mA min
Terminating Impedance: 8 Configurable Settings including
North America 600 ohms, European CTR21

Power Supply:
DC Input Voltage: +5 VDC at 2.0 A Max.
Power Consumption: 5 Watts
Switching Type (100-240v) Automatic
Power Adapter: 100-240v - 50-60Hz (26-34VA) AC Input, 1.8m cord
Phone1, Phone2, Internet, Power

Environmental:
3.98” x 3.98” x 1.10” (101mm x 101mm x 28mm) W x H x D
5.40 oz. (0.153kg)
32º to 113ºF (0º to 45ºC)
-77º to 158ºF (-25º to 70ºC)
10 to 90% Non-condensing